- Begin the 123.hp.com/setup process by configuring your HP Printer on a Wireless Network. For this, ensure that your Router is functioning properly and turned on. Besides, it must be the same network on which your computer is connected.
- Now, turn on your Printer by pressing the Power button on it.
- After that, go to its Control Panel. It must display the Home Screen. However, in case if that is not the case. Then, press the Home button on the Pannel.
- Next, you should locate ‘Setup” and select the same for 123.hp.com/setup. Here, you should remember that the following steps may vary according to your HP Printer Model. For instance, in the case of Touchscreen models, you should tap on the icons on the display panel. On the other hand, use the Arrow keys and “OK” button to move and select options on the display panel.
- Thereafter, select “Network” > “Wireless Network Wizard”.
- After that, it will detect the available Networks in its range and display the same.
- Now, select your Network from this list of available networks.
- Subsequently, enter your Network’s “Password” when prompted.
- As a result, it will connect the HP Printer to the Network for 123.hp.com/setup. Hence, wait for the same.
- At last, select “Finish” or “Done” to complete the configuration.
However, in case if you have a wired HP Printer. Then, either you can directly hook it up to your Network Access Point(Router) by means of an Ethernet/ LAN Cable. Else, you can use a USB cable to connect it to your computer.